ON-OFF Control Wireless Transceiver JZ877

1.500mW,up to 1-3km 2.433/868/915MHz 3.RS232/RS485/TTL 4.1200/2400/4800/9600/19200/38400bps 5.Good stability and reliability

Low Power RF TransmitterTechnical specification of JZ877:

Serial number	Item	Parameter	Note
1	Modulation mode	GFSK
2	Work frequency	433MHZ	868/915mhz is possible
3	Transmission power	0.5W
4	Transmitting current	<360mA
5	Receiving current	<45mA
6.	Sleeping current	0.1mA
7	Receiving sensitivity	-123dbm(1200bps)
8	Channel amount	16 channel	User setting
9	Working temperature	-20+65	°C
10	Working humidity	10%~90%(relative humidity without condensation)
11	Antenna impedance:	50
12	Power supply	DC 5±0.5V
13	Dimension	63mm×43mm×15mm
14	Interface	TTL, RS232, RS485	user can choose
15	Reliable transmit distance	1-3Km

Features:

1. Low Power consumption and receiving sensitivity Transmission power <0.5W, TX current<360mA, RX current<45mA, sleeping current <0.1uA.High receiving sensitivity: -123dbm.2. Saving power modelJZ877 have three Saving power models: awaken from Hardware, awaken from COM Port, awaken from Air; 3. Modulation mode and Frequency Modulation mode: GFSK, Frequency: 433MHZ. Also, 868mhz and 915mhz is possible.4. High anti- interference and low BER(Bit error Rate)Based on the GFSK modulation mode, the high- efficiency forward error correction channel encoding technology is used to enhance datas resistance to both burst interference and random interference and the actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.5. Long transmission distance Within the range of visibility, the reliable distance is >2000m ().6. Transparent data transmission Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted; 7. Multi- channelThe standard JZ877 configuration provides 16 channels to meet the multiple communication combination mode of the user.8. High speed wireless communication and Large data buffer zone    When the RF baudrate is bigger than COM baudrate, allowing to transmit unlimited length data at one time, when the RF baudrate is smaller or equal to the COMs, allowing the transmission of 255 Bytes data . 9. Intelligent data control and the user doesnt need to prepare excessive programs Even for semi duplex communication, the user doesnt need to prepare excessive programs, only receiving/transmitting the data from the interface. JZ872 will complete the other operations automatically, such as transmission/receiving conversion in the air, control, etc.10. High reliability, small and light Single chip radio - frequency integrated circuit and single chip MCU are used for lessened peripheral circuits, high reliability, and low failure rate. 11. Watchdog monitor Watchdog monitors the inner function, it changes the traditional product structure and also improve the reliability of our modules.

Application Scopes:

* AMR Automatic Meter Reading

 * Wireless alarm and security systems

 * Home automation

 * Low power telemetry

 * Wireless conference voting system;

 * Sports training & competition;

 * Wireless dishes ordering;

 * Wireless POS, PDA wireless smart terminal;

 * Electronic bus station and intelligent traffic;

 * RF transmitter Wireless electronic display screen and queuing machine;

 * Wireless telemetry charging for parking, parking lot;

 * Wireless modem Automobile inspection and four-wheel orientation;

 * Wireless sensor Industrial wireless remote control and air conditioning remote controller;

 * Observation and predication of oil well and hydrological information;   * Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system 

ON-OFF Control Wireless Transceiver JZ877